Buy New:£44.95(On sale from £49.95) as of 10/9/2010 01:47 CDT details
Seller:UK Highland Photography Sales Rank:2878
Media:Electronics
MPN:iShoot EAN:5060209030616 ASIN:B002YVX8NO
Availability:Usually dispatched within 1-2 business days
Features:
•
Compatible with: Nikon SB-900
•
fast recycling time and a newly designed layout
•
Need 8 new AA batteries (Alkaline batteries recommended)
•
External Dimension (W x H x D): 69 x 158 x 25mm
Editorial Reviews:
Product Description Excellent Performance --- It is proved that the recycle time can be reduced to less than half of the original and the flashes increased more than double of the original by using the external battery pack. And it is also proved to be very suitable to be used in a continuous flash condition.
CAUTIONS:
1. The battery power is likely to lose due to reasons, e.g. environment temperature or long time storage, so the battery selection is very important and needs to be careful. And it is necessary to replace the battery if the power keeps displaying low.
2. Manganese batteries with low capacities, batteries of difference brands, with difference capacities, or of new & old mix-ups are not suitable to be used here, for it will greatly affect the recycle speed and the flashes. It is recommended to use the high-capacity alkaline, Ni-MH or lithium batteries so as to guarantee the flash light using effect.
3. After 20 continuous shoots, it is recommended to take 10mins break, for the overheat caused by the instant discharge of high current for flash will cause damages.
4. Do not disassemble this product without permission, and please contact with the dealer if there any problem. This product is non-waterproof and should be used in an environment with a temperature of 0C°-40C°.
How to Use:
1. Follow the arrow direction to push down the Lock/Release button, slide the battery cover to open it, insert the batteries as the positive & negative electrode shown, then close the battery cover.
2. Open the flash unit external connecting plug cover in the flash unit power-off condition, then insert with the external battery pack connector plug.
3. Turn on the flash unit power source and proceed with the operations. (The continuous shoots should not exceed 20 times.)
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON EU S.à.r.l. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
